GORILLA WOOD GLUE ✔100% Waterproof ✔Versatile✔Incredibly Strong✔°C Resistant
GORILLA WOOD GLUE ✔100% Waterproof ✔Versatile ✔Incredibly Strong ✔°C Resistant
GORILLA WOOD GLUE
Gorilla Wood Glue is an adhesive that woodworkers, carpenters and hobbyists trust for their woodworking projects. Gorilla Wood Glue, a PVA glue, offers the benefits of an easy-to use, water-based adhesive, with Gorilla strength. This PVA glue is incredibly water resistant and dries a natural color that offers an invisible bond line for your projects.
APPLICATION TEMPERATURE – 55° to 75° F, best at room temperature
SERVICE TEMPERATURE – 0° to 150° F
OUTDOOR – Yes, under covered area
MOISTURE RESISTANT – Water resistant – not recommended for continual water exposure
PAINTABLE – Yes
SANDABLE – Yes
STAINABLE – No
EXPANDS WHEN CURED – No
CURED COLOR – Natural tan wood color
TECHNICAL STANDARDS – ANSI/HPVA Type II
STORAGE TIPS –Store at room temperature. Wipe excess glue from spout and keep sealed.
GAP FILLING – No
How do I remove Gorilla Wood Glue from my surface?
To clean up while glue is wet, use a clean, damp cloth to wipe off excess glue. Make as many passes as needed with the clean area of the cloth to remove all the glue. When areas have completely dried, sand as needed. To clean up glue that has dried, use a sharp putty knife, razor, or sharp scraper to shave hardened glue from surface, then sand as needed.
Gorilla Wood Glue is too thick for my application, can I thin this glue?
Gorilla Wood Glue, unlike Original Gorilla Glue, is a water-based adhesive. You can thin Gorilla Wood Glue by adding water (not to exceed 5% weight).
Will Gorilla Wood Glue bond plastic/vinyl/rubber?
Gorilla Wood Glue is intended for use on hardwoods, softwoods, cardboard, cork, and composite lumber.
Is Gorilla Wood Glue food safe?
Once cured, Gorilla Wood Glue complies with FDA #CFR21 175.105 for indirect food contact and can be used on projects such as salad bowls and cutting boards.
How can I clean a clogged tip?
To clean the bottle tip, use a clean, damp cloth to wipe off excess glue after closing. If tip becomes clogged with dry glue, remove the cap, pull off the nozzle, and push the clog backward with a toothpick, then rinse cap with warm water. If you have difficulty pulling up on the nozzle, use a pair of pliers or scissors placed at the base of the nozzle and twist slightly.
How do I remove Gorilla Wood Glue from my body or skin?
To remove Gorilla Wood Glue from hands, wash with soap and warm water.
Click images to enlarge
- COMPLETE PROJECTS FAST: Requires only 20-30 minutes of clamp time, fully cured in 24 hours.
- USE INDOORS OR OUTDOORS: Passes ANSI/HPVA Type II water resistance.
- VERSATILE: Ideal for use on hardwoods, softwoods, and natural wood composites.
- DRIES NATURAL COLOR: Offering a natural bond line.